Products

Home > Products > by Range > Thickness Gauges > T-Gage Series > T-Gage IV+

T-Gage IV+

The T-GAGE IV+ is a hand-held Ultrasonic Thickness Gauge offering extended features to make on site work easier, built to perform in the roughest of industry conditions. The T-Gage IV+ can be calibrated to a variety of different materials using one or two point calibration and comes as a complete kit, ready to use, and is backed by 5 year limited warranty.

Overview
Specification

T-Gage IV+ Overview

The T-Gage IV+ has the following enhanced features over the entry level T-Gage IV thickness gauge:

Alarm Mode

Differential Mode

High Speed Scanning

RS232 Output and Data Send options

Packaged in an all metal case, the units are sealed with gaskets to protect them from harsh working environments; resistant to both water and petroleum products.

A dual element transducer is included. Application specific transducers are also available for Cast, Iron, Plastics, Fibreglass, Steel and Glass.

Small and portable, the T-Gage IV+ operates on 2 AA batteries for 200 hours plus.

All gauges in the T-GAGE series are covered by a 5 year limited warranty.

Applications include: Corrosion and Pitting, Tube and Pipe, Tanks and Boilers, Plastics/Polypropylene.

T-Gage IV+ Specification

Weight: 285 g with batteries (10 ounces)
Size: 63.5w x 120.7h x 31.8d mm (2.5w x 4.75h x 1.25d inches)
Operating Temperature: -30° to 50°C (-20° to 120°F)
Case: Extruded aluminium body with nickel plated aluminium end caps.

Transducers: Dual element (transmit and receive). 1 - 10 MHz frequency range. Locking quick disconnect LEMO 00 connectors. 1.2m (4ft) cable.
Custom transducers available for special applications.

MEASURING

Overall Range: Measures from 0.63 to 500 mm (0.025 to 19.999 inches).
Toggle switch to select English or Metric units.
Resolution: 0.01 mm (0.001 inches)
Velocity Range: 1250 to 10,000 m/sec 0.0492 to 0.3937 in/μs
Four readings per second for single point measurements or 16 per second in Scan mode – captures the minimum thickness.

Features

Differential Mode

Enter the acceptable thickness value, unti will display +/- the difference from the entered value.

Alarm Mode

Enter a minimum acceptable thickness value. If the measurement falls below the minimum, a red LED will illuminate and an alert beeper will sound. If measurement is above minimum value set a green LED illuminates.